Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
Engine Coolant Temperature Sensor Cold Start Monitor
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | P0102 to P0103: Mass air flow meter P0110 to P0113: Intake air temperature sensor |
| Battery voltage | 10.5V or more |
| Time after engine start | 1 second or more |
| Engine coolant temperature at engine start | Less than 60°C (140°F) |
| Intake air temperature sensor circuit | OK |
| Soak time | 0 or more |
| Accumulated mass air flow | 825 g or more (Manual transaxle), 1422 g or more (Automatic transaxle) |
| Fuel cut | OFF |
| Difference between engine coolant temperature at engine start and intake air temperature | Less than 40°C (72°F) |
Engine Coolant Temperature Sensor Soak Monitor
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | P0102 to P0103: Mass air flow meter |
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| Either (a) or (b) condition met | - |
| (a) Engine coolant temperature | 60°C (140°F) or more |
| (b) Accumulated mass air flow | 1661 g or more (Manual transaxle), 3185 g or more (Automatic transaxle) |