Typical Enabling Conditions
WARNING: This page is about a different variant/trim than selected.
Fuel-trim
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | P0010 (Camshaft timing oil control valve) P0011 (VVT System 1 - Advance) P0012 (VVT System 1 - Retard) P0031, P0032 (Air fuel ratio sensor heater - Sensor 1) P0102 - P0103 (Mass air flow meter) P0115 - P0118 (Engine coolant temperature sensor) P0120 - P0223, P2135 (Throttle position sensor) P0125 (Insufficient engine coolant temperature for closed loop) P0335 (Crankshaft position sensor) P0340 (Camshaft position sensor) P0351 - P0354 (Igniter) P0500 (Vehicle speed sensor) |
| Fuel system status | Closed-loop |
| Battery voltage | 11 V or more |
| Either of following conditions 1 or 2 set | - |
| 1. Engine RPM | 720 rpm or less |
| 2. Intake air amount per revolution | 0.16 g/rev or more |
| Catalyst monitor | No executed |