Exhaust Pipe And Catalytic Converter: Removal

WARNING: This page is about a different variant/trim than selected.

REMOVE TAIL EXHAUST PIPE ASSEMBLY
1. Remove the 2 bolts and 2 compression springs.
2. Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.
3. Remove the gasket from the front exhaust pipe assembly.
REMOVE HEATED OXYGEN SENSOR (See HEATED OXYGEN SENSOR )

Fig 1: Locating Bolts And Compression Springs
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT EXHAUST PIPE ASSEMBLY
1. Remove the 2 bolts and 2 compression springs.
2. Remove the front exhaust pipe assembly from the 2 exhaust pipe supports.
3. Remove the gasket from the exhaust manifold.
  
  Fig 2: Locating Bolts And Compression Springs
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002