Inspection Procedure

CHECK MAP DISC
1. Check that the map disc is not deformed or cracked.
  
  Fig 1: Checking Disc
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  OK: No deformations or cracks on the map disc
  
  NG: REPLACE MAP DISC
  
  OK: Go to Next Step
SET DESTINATION
1. Set another destination and check if the system can calculate the route correctly.
  OK: Route can be correctly calculated .
  
  NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
  
  OK: NORMAL OPERATION