Service Data
SERVICE DATA REFERENCE CHART
| Front wheel alignment | Vehicle height | ||
| A-B: D-C: |
95 mm (3.74 in.) 62 mm (2.40 in.) |
||
| Toe-in (total) Rack end length difference |
0° +-12' (0° +-0.2°, 0 +-2 mm, 0 +-0.08 in.) 1.5 mm (0.059 in.) or less |
||
| Wheel angle | Inside wheel | 40° 35' +-2° | |
| (40.58° +-2°) | |||
| Outside wheel: Reference | 34°15' (34.25°) | ||
| Camber Right-left error | -0° 35' +-45' (-0.58° +-0.75°) 45' (0.75°) or less | ||
| Caster Right-left error | 3°10" +-45' (3.17°+-0.75°) 45' (0.75°) or less | ||
| Steering axis inclination Right-left error | 12°35' +-45' (12.58° +-0.75°) 45' (0.75°) or less | ||
| Rear wheel alignment | Toe-in (total) | 0°18' +-15' (0.30° +-0.25°, 3.0 +-2.5 mm, 0.12+-0.10 in.) | |
| Camber Right-left error | -1°30'+-30' (-1.50+-0.5°) 30' (0.5°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 to 4.90 N*m (10 to 50 kgf*cm, 8.7 to 43 in.*lbf) | |
| Stabilizer link turning torque | 0.05 to 1.96 N*m (0.5 to 20 kgf*cm, 0.4 to 17.4 in.*lbf) | ||
A: Ground clearance of front wheel center
B: Ground clearance of lower arm No.1 set bolt center
C: Ground clearance of rear axle carrier bush set bolt center
D: Ground clearance of rear wheel center