Typical Enabling Conditions
All:
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not stored | None |
P2111 (Throttle actuator stuck open):
TYPICAL ENABLING CONDITIONS CHART
| All of following conditions are met | - |
| System guard* | ON |
| Throttle actuator current | 2 A or higher |
| Duty-cycle to close throttle | 80% or more |
P2112 (Throttle actuator stuck closed):
TYPICAL ENABLING CONDITIONS CHART
| All of following conditions are met: | - |
| System guard* | ON |
| Throttle actuator current | 2 A or higher |
| Duty-cycle to open throttle | 80% or more |
TYPICAL ENABLING CONDITIONS CHART
| *: System guard set when following conditions are met: | - |
| Throttle actuator | ON |
| Throttle actuator duty calculation | Executing |
| Throttle position sensor | Failure determined |
| Throttle actuator current-cut operation | Not executing |
| Throttle actuator power supply | 4 V or higher |
| Throttle actuator | Failure determined |