LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2AR-FE) - Service Information & Circuit Tests >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL  )
  2. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side) 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
      Fig 1: Locating Bolt And Sensor
      G05997191Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side) 
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals