Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)
1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
  
  Fig 1: Identifying NEW O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  NOTE:
  - Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
  - Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
3. Connect the oil control valve connector.
  
  Fig 2: Locating Bolt And Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)
1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
  
  Fig 3: Identifying New O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the oil control valve with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  NOTE:
  - Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
  - Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
3. Connect the oil control valve connector.
  
  Fig 4: Locating Bolt And Oil Control Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT FOR OIL LEAK
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )