LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (2AR-FE) - Service Information & Circuit Tests >> Knock Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Installation

  1. INSTALL KNOCK SENSOR 
    1. Install the sensor with the bolt so that the sensor is angled as shown in the illustration.

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

      NOTE: The acceptable installation angle of the sensor is between 7° upward and 10° downward from the horizontal position.
    2. Connect the sensor connector.
  2. INSTALL INTAKE MANIFOLD 
    1. Install the intake manifold (See INSPECTION ).
      Fig 1: Locating Sensor And Bolt
      G05997209Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals