Steering Pad Switch: Removal

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE STEERING PAD ASSEMBLY (See INSTALLATION )
REMOVE STEERING PAD SWITCH ASSEMBLY (w/o Telephone Microphone)
1. Disconnect the connectors.
2. Remove the screw.
3. Detach the claw and remove the steering pad switch assembly.
Fig 1: Detaching Claw And Remove Steering Pad Switch Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Telephone Microphone)
1. Disconnect the connectors.
2. Remove the 2 screws.
3. Detach the 2 claws and remove the steering pad switch assembly.
Fig 2: Detaching Claws And Remove Steering Pad Switch Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002