LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Engine Control System (2GR-FE)) >> Accelerator Pedal Rod >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Pedal Rod: Installation

WARNING: This page is about a different car, the 2007 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL ACCELERATOR PEDAL ROD 
    1. Install the accelerator pedal rod with the 2 bolts.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the accelerator pedal position sensor connector.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Locating Accelerator Pedal Rod Bolts
    G05183872Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals