LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System (2GR-FE) - Component And System Testing, Removal, Inspection & Installation) >> Camshaft Timing Oil Control Valve Assembly >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Check the operation.
      1. Connect the Techstream to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the Techstream main switch ON.
      4. Start and warm up the engine.
      5. Enter the following menus: Powertrain / Engine and ECT / Active Test.
      6. Operate the oil control valve using the Techstream, and then check the engine speed.

        Standard condition 

        SPECIFIED CONDITION REFERENCE CHART

        Condition Specified Condition
        Oil control valve is OFF Normal engine speed
        Oil control valve is ON Rough idling or engine stalls

        If the operation is not as specified, check the oil control valve, wire harness and ECM.

scientia non olet · About LEMON Manuals