Service Data
2GR-FE STARTING - SERVICE DATA
| Starter assembly | Standard current | 90 A or less at 11.5 V | |
| Starter relay | Standard resistance | 3-5 | 10 kΩ or higher |
| 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) | ||
| Starter Cut relay | Standard resistance | 3-5 | 10 kΩ or higher |
| 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) | ||
| ACC relay | Standard resistance | 3-5 | 10 kΩ or higher |
| 3-5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) | ||
| Ignition switch | Standard resistance | - | 10 kΩ or higher at LOCK |
| 2 (AM1) - 3 (ACC) | Below 1 Ω at ACC | ||
| 2 (AM1) - 3 (ACC) | Below 1 Ω at ON | ||
| 2 (AM1) - 4 (IG1) | Below 1 Ω at ON | ||
| 6 (IG2) - 7 (AM2) | Below 1 Ω at ON | ||
| 1 (ST1) - 2 (AM1) | Below 1 Ω at START | ||
| 1 (ST1) - 4 (IG1) | Below 1 Ω at START | ||
| 6 (IG2) - 7 (AM2) | Below 1 Ω at START | ||
| 6 (IG2) - 8 (ST2) | Below 1 Ω at START | ||
| Engine switch | Standard resistance | 7 (SS1) - 5 (GND) | 10 kΩ or higher at Not pushed |
| 2 (SS2) - 5 (GND) | 10 kΩ or higher at Not pushed | ||
| 7 (SS1) - 5 (GND) | Below 1 Ω at Pushed | ||
| 2 (SS2) - 5 (GND) | Below 1 Ω at Pushed | ||
| Starter magnetic switch assembly | Standard resistance | 50-C | 1 Ω or lower |
| 50 - Body | 2 Ω or lower | ||
| Starter armature assembly | Standard resistance | Segment | 1 Ω or lower |
| Segment - Coil core | 10 kΩ or higher | ||
| Starter armature assembly | Commutator depth | Standard | 3.1 mm (0.122 in.) |
| Maximum | 3.8 mm (0.150 in.) | ||
| Starter commutator end frame | Brush length | Standard length | 9.0 mm (0.354 in.) |
| Minimum length | 4.0 mm (0.158 in.) | ||
| Standard resistance | Positive (+) - Negative (-) | 10 kΩ or higher | |
| Snap ring | Maximum length | 5.0 mm (0.197 in.) | |