Service Data
Stop Light Switch
STOP LIGHT SWITCH - SERVICE DATA
| Stop light switch BR-11 | Resistance 1 - 2 | Switch pin released | Below 1 Ω |
| Resistance 1 - 2 | Switch pin pushed in | 10 kΩ or higher |
Brake Pedal Load Sensing Switch
BRAKE PEDAL LOAD SENSING SWITCH - SERVICE DATA
| Brake pedal load sensing switch BC-303 | Resistance 1-2 | Brake pedal depressed | Approx. 1 kΩ |
| Resistance 1-2 | Brake pedal released | Approx. 213 Ω |
Brake Pedal
BRAKE PEDAL - SERVICE DATA
| Brake pedal height from dash panel BR-11 | 184.2 to 194.2 mm (7.252 to 7.646 in.) |
| Stop light switch clearance BR-11 | 1.5 to 2.5 mm (0.059 to 0.098 in.) |
| Brake pedal free play BR-12 | 1.0 to 6.0 mm (0.039 to 0.236 in.) |
| Brake pedal reserve distance from dash panel BR-12 | See the table below. |
Brake Pedal Reserve Distance from Dash Panel
BRAKE PEDAL RESERVE DISTANCE FROM DASH PANEL - SERVICE DATA
| Engine | Specified Condition |
|---|---|
| 2AR-FE (w/o 3rd seat) | More than 95 mm (3.74 in.) |
| 2AR-FE (w/ 3rd seat) | More than 120 mm (4.72 in.) |
| 2GR-FE (w/o 3rd seat) | More than 120 mm (4.72 in.) |
| 2GR-FE (w/ 3rd seat) | More than 120 mm (4.72 in.) |
Brake Fluid Level Warning Switch
BRAKE FLUID LEVEL WARNING SWITCH - SERVICE DATA
| Brake fluid level warning switch BR-16 | Resistance 1 - 2 | Float up (Switch OFF) | 10 kΩ or higher |
| Resistance 1-2 | Float down (Switch ON) | Below 1 Ω |
Brake Booster
BRAKE BOOSTER - SERVICE DATA
| Booster push rod and pin head (SST) clearance BR-19 | -0.21 to 0 mm (-0.0083 to 0 in.) |
Front Brake
FRONT BRAKE - SERVICE DATA
| Pad lining thickness BR-33 | Standard | 12.0 mm (0.472 in.) | |
| Minimum | 1.0 mm (0.039 in.) | ||
| Disc thickness BR-34 | 10.83 inch disc | Standard | 25.0 mm (0.984 in.) |
| Minimum | 22.0 mm (0.866 in.) | ||
| 11.70 inch disc | Standard | 28.0 mm (1.102 in.) | |
| Minimum | 25.0 mm (0.984 in.) | ||
| Disc runout BR-34 | Maximum | 0.05 mm (0.0020 in.) | |
Rear Brake
REAR BRAKE - SERVICE DATA
| Pad lining thickness BR-47 | Standard | 10.5 mm (0.413 in.) |
| Minimum | 1.0 mm (0.039 in.) | |
| Disc thickness BR-48 | Standard | 12.0 mm (0.472 in.) |
| Minimum | 10.5 mm (0.413 in.) | |
| Disc runout BR-48 | Maximum | 0.15 mm (0.0059 in.) |