October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Steering Angle Sensor: Installation
- INSTALL STEERING ANGLE SENSOR
- Align the holes of the sensor with the pins on the spiral cable, and attach the 6 claws to install the sensor to the spiral cable.
- INSTALL SPIRAL CABLE SUB-ASSEMBLY
(See
INSTALLATION
)
- INSTALL STEERING COLUMN COVER
(See
INSTALLATION
)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL STEERING WHEEL ASSEMBLY
(See
INSTALLATION
)
- INSTALL STEERING PAD ASSEMBLY
(See
INSTALLATION
)
- INSPECT STEERING WHEEL CENTER POINT
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When reconnecting the cable to the negative (-) battery terminal after installing the steering angle sensor, check that the front tires and steering wheel are kept aligned straight ahead before and after connecting the cable to the negative (-) battery terminal.
- INSPECT STEERING PAD ASSEMBLY
(See
DISPOSAL
)
- CHECK SRS WARNING LIGHT
- Check the SRS warning light (See
DIAGNOSIS SYSTEM
).