Accelerator Pedal Rod: Removal

WARNING: This page is about a different variant/trim than selected.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ACCELERATOR PEDAL ROD
1. Disconnect the accelerator pedal position sensor connector.
2. Remove the 2 bolts and accelerator pedal rod.
  
  Fig 1: Locating Accelerator Pedal Position Sensor Connector And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002