LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System (2GR-FE) - Component And System Testing, Removal, Inspection & Installation) >> Knock Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE INTAKE AIR SURGE TANK ASSEMBLY  (See REMOVAL )
  3. REMOVE INTAKE MANIFOLD  (See REMOVAL )
  4. REMOVE KNOCK SENSOR 
    1. Disconnect the 2 sensor connectors.
    2. Remove the 2 bolts and 2 sensors.
      Fig 1: Locating Sensor Connectors And Bolts
      G04973904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals