LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Cruise Control System) >> Cruise Control Main Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Main Switch: Removal

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
  2. REMOVE LOWER NO. 3 STEERING WHEEL COVER  (See REMOVAL )
  3. REMOVE LOWER NO. 2 STEERING WHEEL COVER  (See REMOVAL )
  4. REMOVE STEERING PAD  (See REMOVAL )
  5. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
    2. Remove the 2 screws.
      3. Fig 1: Locating Cruise Control Main Switch Connector And Screws
      G06009689Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the switch as shown in the illustration.
scientia non olet · About LEMON Manuals