LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Camshaft Timing Oil Control Valve Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Removal

  1. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY 

    HINT:

    (See OPERATION CHECK )

  2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY  (See REMOVAL )
  3. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  4. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE NO. 2 AIR CLEANER INLET  (See REMOVAL )
  6. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
  7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL  )
  8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY  (See REMOVAL )
  9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY  (See REMOVAL  )
  10. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Exhaust Side) 
    1. Disconnect the camshaft timing oil control valve assembly connector.
    2. Remove the bolt and camshaft timing oil control valve assembly.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 1: Locating Camshaft Timing Oil Control Valve Assembly And Bolt
      G04973847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Intake Side) 
    1. Disconnect the camshaft timing oil control valve assembly connector.
    2. Remove the bolt and camshaft timing oil control valve assembly.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 2: Locating Camshaft Timing Oil Control Valve Assembly And Bolt (Intake Side)
      G04973848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side) 
    1. Disconnect the camshaft timing oil control valve assembly connector.
    2. Remove the bolt and camshaft timing oil control valve assembly.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 3: Locating Camshaft Timing Oil Control Valve Assembly And Bolt (Exhaust Side)
      G04973850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Intake Side) 
    1. Disconnect the camshaft timing oil control valve assembly connector.
    2. Remove the bolt and camshaft timing oil control valve assembly.
    3. Remove the O-ring from the camshaft timing oil control valve.
      Fig 4: Locating Camshaft Timing Oil Control Valve Assembly Connector
      G04973849Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals