Engine Control System - System & Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation: ECM: Installation

INSTALL ECM
1. Install the ECM with the 2 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 1: Identifying ECM Connectors And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 5 ECM connectors.
INSTALL ECM (with 10 speakers system)
1. Install the ECM and stereo components amplifier with the 4 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 2: Locating Stereo Components Amplifier With Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 5 ECM connectors and 2 stereo components amplifier connectors.
INSTALL NO. 2 INSTRUMENT PANEL BOX
1. Install the No. 2 instrument panel box.
  
  Fig 3: Identifying No. 2 Instrument Panel Box
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
1. Install the glove compartment door sub-assembly frontward to install it.
  
  Fig 4: Installing Glove Compartment Door Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Push the right side wall and then push the left wall to install the stoppers.
PERFORM REGISTRATION
1. When replacing the ECM, perform distance control ECU recognition in ECM (See INSTALLATION ).
  
  Fig 5: Identifying Glove Compartment Door Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002