VVT Sensor: Removal

REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
HINT:

(See OPERATION CHECK )
REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY (See REMOVAL )
DRAIN ENGINE COOLANT (See REPLACEMENT )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 2 AIR CLEANER INLET (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER CASE SUB-ASSEMBLY (See REMOVAL )
REMOVE INTAKE AIR SURGE TANK ASSEMBLY (See REMOVAL )
REMOVE VVT SENSOR (for Bank 1 Intake Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 1: Locating VVT Sensor And Bolt (Intake Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 1 Exhaust Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 2: Locating VVT Sensor And Bolt (Exhaust Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 2 Intake Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 3: Locating VVT Sensor Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 2 Exhaust Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 4: Locating VVT Sensor And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002