LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Audio/Visual) >> Audio And Visual System >> CD Sound Skips >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CD 
    1. Check the CD.

      OK: The CD is clean. 

      HINT:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTE: Do not use a conventional record cleaner or antistatic preservative.

      NG: CLEAN CD 

      Fig 1: Cleaning Disc With Soft Dry Cloth
      G04833494Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK: Go to Next Step 

  2. CHECK CD 
    1. Check that the CD is not deformed or cracked.

      OK: No deformation or cracks on the CD. 

      NG: CHANGE DISC 

      Fig 2: Checking CD
      G06010477Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK: Go to Next Step 

  3. CHECK OPERATION 
    1. Check if the problem recurs using a known good CD.

      OK: The problem does not occur. 

      NG: Go to step 4 

      OK: END 

  4. CHECK RADIO RECEIVER 
    1. Check the radio receiver installation condition.
      1. Check that the radio receiver is properly installed.

        OK: Radio receiver is properly installed. 

        NG: REINSTALL RADIO RECEIVER PROPERLY 

        OK: REPLACE RADIO RECEIVER  (See REMOVAL )