LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Sienna XLE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, On-Vehicle Inspection, Removal, Inspection & Installation >> Camshaft Timing Oil Control Valve Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Installation

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side) 
    1. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
      Fig 1: Locating O-Ring
      G05136347Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft timing oil control valve assembly with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 2: Locating Camshaft Timing Oil Control Valve Assembly And Bolt
      G04973850Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the camshaft timing oil control valve assembly connector.
  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Intake Side) 
    1. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
      Fig 3: Locating O-Ring
      G05136349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft timing oil control valve assembly with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Connect the camshaft timing oil control valve assembly connector.

      Fig 4: Locating Camshaft Timing Oil Control Valve Assembly Connector
      G04973849Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Exhaust Side) 
    1. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
      Fig 5: Locating O-Ring
      G05136349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft timing oil control valve assembly with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 6: Locating Camshaft Timing Oil Control Valve Assembly And Bolt
      G04973847Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the camshaft timing oil control valve assembly connector.
  4. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Intake Side) 
    1. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
      Fig 7: Locating O-Ring
      G05136353Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the camshaft timing oil control valve assembly with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 8: Locating Camshaft Timing Oil Control Valve Assembly And Bolt
      G04973848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the camshaft timing oil control valve assembly connector.
  5. INSTALL INTAKE AIR SURGE TANK ASSEMBLY  (See INSTALLATION  )
  6. INSTALL AIR CLEANER CASE SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION  )
  8. INSTALL NO. 1 AIR CLEANER INLET  (See INSTALLATION )
  9. INSTALL NO. 2 AIR CLEANER INLET  (See INSTALLATION )
  10. ADD ENGINE COOLANT  (See REPLACEMENT )
  11. INSPECT FOR ENGINE COOLANT LEAK  (See ON-VEHICLE INSPECTION )
  12. INSPECT FOR ENGINE OIL LEAK  (See REPLACEMENT )
  13. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  14. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY  (See INSTALLATION )
  15. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY 

    HINT:

    (See OPERATION CHECK )

scientia non olet · About LEMON Manuals