VVT Sensor: Installation

INSTALL VVT SENSOR (for Bank 2 Exhaust Side)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 1: Locating VVT Sensor And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the VVT sensor connector.
INSTALL VVT SENSOR (for Bank 2 Intake Side)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Locating VVT Sensor Connector And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the VVT sensor connector.
INSTALL VVT SENSOR (for Bank 1 Exhaust Side)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 3: Locating VVT Sensor And Bolt (Exhaust Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the VVT sensor connector.
INSTALL VVT SENSOR (for Bank 1 Intake Side)
1. Install the VVT sensor with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 4: Locating VVT Sensor And Bolt (Intake Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the VVT sensor connector.
INSTALL INTAKE AIR SURGE TANK ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL NO. 2 AIR CLEANER INLET (See INSTALLATION )
ADD ENGINE COOLANT (See ON-VEHICLE INSPECTION )
INSPECT FOR ENGINE COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSPECT FOR ENGINE OIL LEAK (See REPLACEMENT )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
HINT:

(See OPERATION CHECK )