Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | P0010, P0020 (OCV Bank 1, 2) P0011, P0021 (VVT System - advance) P0012, P0022 (VVT System - retard) P0016, P0018 (VVT System - misalignment) P0102, P0103 (MAF meter) P0115, P0117, P0118 (ECT sensor) P0120 - P0123, P0220, P0222, P0223, P2135 (TP sensor) P0125 (Insufficient ECT for closed loop) P0171, P0172, P0174, P0175 (Fuel system) P0301 - P0306 (Misfire) P0335 (CKP sensor) P0340, P0342, P0343, P0345, P0347, P0348 (VVT sensor) P0351 - P0356 (Igniter) P0500 (VSS) P2195 - P2198, P2237 - P2242, P2252, P2253, P2255, P2256, P2A00, P2A03 (A/F sensor) |
| Battery voltage | 8 V or more |
| Time after engine start | 3 seconds or more |
| Starter | OFF |
| ECT at engine start | -10°C (14°F) or more |
| ECT | -10 to 50°C (14 to 122°F) |
| Engine idling time | 3 seconds or more |
| Fuel-cut | OFF |
| Vehicle speed | Less than 1.875 mph (3 km/h) |
| Time after shift position changed | 1 second or more |
| Atmospheric pressure | 76 kPa (570 mmHg) or more |