Skid Control Buzzer: Inspection
WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SKID CONTROL BUZZER ASSEMBLY
- Apply battery's positive (+) lead to terminal 1 of the skid control buzzer, and negative (-) lead to terminal 2. Then check that the buzzer sounds.
OK: Skid control buzzer sounds.
If the result is not as specified, replace the skid control buzzer assembly.
- Apply battery's positive (+) lead to terminal 1 of the skid control buzzer, and negative (-) lead to terminal 2. Then check that the buzzer sounds.