DTC C1336/39 Zero Point Calibration of Acceleration Sensor Undone: Description
WARNING: This page is about a different car, the 2009 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
A new skid control ECU is supplied without zero point calibration for the deceleration sensor and master cylinder pressure sensor. Until the zero points are calibrated, DTC C1336/39 remains stored. By entering test mode, the zero point calibration is automatically performed, and DTC C1336/39 is cleared automatically.
DTC DETECTION CONDITION CHART
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1336/39 | When the vehicle is driven without completion of zero point calibration. |
|