Circuit Opening Relay: Inspection
WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CIRCUIT OPENING RELAY ASSEMBLY
- Check the resistance.
- Using an ohmmeter, measure the resistance between the terminals.
Standard
TESTER CONNECTIONS SPECIFIED CONDITIONS CHARTTester Connection Specified Condition 3 - 5 10 kΩ or higher 3 - 5 Below 1 Ω (Apply battery voltage to terminals 1 and 2) If the result is not as specified, replace the circuit opening relay assembly.
- Using an ohmmeter, measure the resistance between the terminals.
- Check the resistance.