Typical Enabling Conditions
WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | None |
Cold start monitor:
TYPICAL ENABLING CONDITIONS CHART
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| IAT sensor circuit fail (P0110, P0112, P0113) | Not detected |
| Soak time | 0 seconds or more |
| Accumulated MAF | 1589 g or more |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
Soak monitor:
TYPICAL ENABLING CONDITIONS CHART
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| ECT | 60°C (140°F) or more |
| Accumulated MAF | 3440 g or more |