Typical Enabling Conditions
WARNING: This page is about a different car, the 2009 Toyota Tacoma. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS CHART
| Monitor runs whenever following DTCs not present | P0016 (VVT system - misalignment) P0031, P0032 (A/F sensor heater) P0100 - P0103 (MAF meter) P0110 - P0113 (IAT sensor) P0115 - P0118 (ECT sensor) P0120 - P2135 (Throttle position sensor) P0128 (thermostat) P0171, P0172 (Fuel system) P0301 - P0304 (Misfire) P0335 (Crankshaft position sensor) P0340 (Camshaft position sensor) P0412, P0418, P1613 (Secondary air injection system control) P0500 (VSS) P0505 (ISC) P2440 - P2445 (Secondary air injection system) |
| A/F sensor active control | Executing |
| Engine coolant temperature | 70°C (158°F) or more |
| Battery voltage | 11 V or more |
| Engine RPM | Less than 4000 rpm |
| A/F sensor status | Activated |
| Fuel-cut | OFF |
| Engine load | 10 to 70% |
| Shift position | 2nd or more |
| Intake air amount | 4 to 16g/sec |
| Idle | OFF |
| Catalyst monitor | Not yet |