Skid Control Buzzer: Installation

INSTALL SKID CONTROL BUZZER ASSEMBLY
1. Connect the skid control buzzer assembly connector.
  
  Fig 1: Locating Skid Control Buzzer Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the skid control buzzer assembly clamp.
  
  Fig 2: Identifying Skid Control Buzzer Assembly Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the wire harness clamp.
INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY
HINT:

Refer to the procedure up to Install Driver Side Knee Airbag Assembly (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT SRS WARNING LIGHT (See DIAGNOSIS SYSTEM )