LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Venza 2.7 E, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control System >> VSC Off Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VSC Off Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH  (See REMOVAL )
  4. REMOVE LOWER NO. 1 INSTRUMENT FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. REMOVE VSC OFF SWITCH 
    1. Disengage the 2 claws and remove the VSC OFF switch.
scientia non olet · About LEMON Manuals