LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Venza 2.7 E, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (1AR-FE) - System Testing, Removal & Installation >> Engine Coolant Temperature Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Removal

  1. REMOVE NO. 1 ENGINE UNDER COVER 
  2. REMOVE NO. 2 ENGINE UNDER COVER 
  3. REMOVE WINDSHIELD WIPER MOTOR AND LINK 
    1. Remove the windshield wiper motor and link (See REMOVAL ).
  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY  (See REMOVAL )
  5. DRAIN ENGINE COOLANT  (See COOLANT )
  6. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  (See REMOVAL )
  7. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY  (See PURGE VALVE )
  8. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  (See REMOVAL  )
  9. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY  (See REMOVAL )
  10. REMOVE AIR CLEANER CASE  (See REMOVAL )
  11. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.

      Text in Illustration 

      ILLUSTRATION LEGEND

      *1 Gasket
    2. Remove the engine coolant temperature sensor and gasket.
scientia non olet · About LEMON Manuals