LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Venza 3.5 K, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control/Dynamic Control System >> Relay >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. REMOVE STOP LIGHT CONTROL (BRK) RELAY 
    1. Remove the stop light control (BRK) relay.
    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      3-4 Voltage is not applied between terminals 1 and 2 Below 1 Ω
      3-5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3-4 Voltage is applied between terminals 1 and 2 10 kΩ or higher
      3-5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      Text in Illustration 

      ILLUSTRATION LEGEND

      *1 Stop Light Control(BRK) Relay
      Fig 1: Inspecting Stop Light Control (BRK) Relay
      G06026110Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals