Height Control Sensor: Installation

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY
1. Connect the connector.
2. Connect the height control sensor link to the rear axle beam with the nut.
3. Install the height control sensor with the 2 bolts.
  
  Fig 1: Installing Height Control Sensor Sub-Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
ADJUST HEADLIGHT AIM ONLY (See ADJUSTMENT )