LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2009 >> Yaris Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Audio System & Visual System) >> Audio And Visual System >> CD Sound Skips >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2009 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CD 
    1. Check the CD.

      OK: 

      The CD is clean. 

      HINT:

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTE: Do not use a conventional record cleaner or antistatic preservative.

    NG: CLEAN CD 

    Fig 1: Cleaning Disc Surface With Soft Dry Cloth
    G04833494Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    OK: Go to next step 

  2. CHECK CD 
    1. Check that the CD is not deformed or cracked.

      OK: 

      No deformation or cracks on the CD. 

    NG: REPLACE CD 

    Fig 2: Checking Disc For Deformed Or Cracked
    G04948904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    OK: Go to next step 

  3. CHECK OPERATION 
    1. Check using another CD.
      1. Check if the problem recurs using another CD.

        OK: 

        The problem does not occur. 

    OK: END 

    NG: Go to next step 

  4. CHECK RADIO RECEIVER 
    1. Check the radio receiver installation condition.
      1. Check that the radio receiver is properly installed.

        OK: 

        Radio receiver is properly installed. 

    NG: REINSTALL RADIO RECEIVER PROPERLY 

    OK: REPLACE RADIO RECEIVER