LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> 4Runner Limited, AWD >> Repair and Diagnosis >> General Information >> Identification >> Introduction >> Repair Instruction >> Customize Parameters >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH THE TECHSTREAM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. POWER DOOR LOCK CONTROL SYSTEM
      DOOR LOCK

      Display Default Content Setting
      Auto Lock OFF Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF
      Auto Lock/Shift ON Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON or OFF
      Auto Unlock/Shift ON Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is on. ON or OFF
      All Unlock/Open-Close OFF Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off. ON or OFF
    2. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System)
      WIRELESS DOOR LOCK

      Display (item) Default Function Setting
      Wireless Control ON Function that turns wireless door lock / on or off ON or OFF
      Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF
      Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON or OFF
      Panic Function ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds ON or OFF
      Auto Lock Time 60 s Function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s or 120 s
      Wireless Auto Lock ON This function turns the wireless auto lock function on or off. ON or OFF
      Wireless Buzzer Resp ON Wireless door lock buzzer response / on or off ON or OFF
      P/W Ope buzzer ON Wireless power window buzzer response / on or off ON or OFF
      Wireless Buzzer Vol Level7 Wireless door lock buzzer Volume Level7/Level6/Level5/Level4/Level3/Level2/Level1 or Level0
    3. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System)
      WIRELESS DOOR LOCK

      Display (item) Default Function Setting
      Wireless Control ON Function that turns wireless door lock / on or off ON or OFF
      Hazard Answer Back ON When the lock switch on the transmitter is pressed, this function illuminates the hazard warning lights and side turn signal lights once. When the unlock switch is pressed, the hazard warning lights and side turn signal lights illuminate twice. ON or OFF
      Open Door Warning ON If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds. ON or OFF
      Panic Function ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds ON or OFF
      Auto Lock Time 60 s Function that changes the time until relocking after unlocking the doors with the wireless door lock function. 30 s/60 s or 120 s
      Wireless Auto Lock ON This function turns the wireless auto lock function on or off. ON or OFF
      Wireless Buzzer Resp ON Wireless door lock buzzer response / on or off ON or OFF
      P/W Ope buzzer ON Wireless power window buzzer response / on or off ON or OFF
      Wireless Buzzer Vol Level7 Wireless door lock buzzer Volume Level7/Level6/Level5/Level4/Level3/Level2/Level1 or Level0
    4. SMART KEY SYSTEM (for Entry Function)
      SMART KEY

      Display Default Contents Setting
      Park Wait Time (Waiting time to permit unlocking door after locking) 2.5s Function that sets the waiting time to permit unlocking the door after the door is locked with the entry lock function. 0.5s/1.5s/2.5s or 5s
      Ignition Available Area
      (Entry ignition available area)      		 All Function to choose the available area for the key to start the engine and cancel the steering lock. Front or All
      Back Door Opening Operation (Back door open mode when vehicle is locked) Long Function to choose the back door open operation mode when the vehicle is locked. Long/Twice or OFF
      Door Unlock Mode Driver Function that chooses the doors to be operated by entry unlock operation All or Driver
      Touch activation Over Threshold Active The function that limits the consecutive entry lock operation to only 2 times can be changed between Active and Not Active.
      When in Not Active mode, there is no limit for the number of times that the consecutive entry lock operation can be performed.      		 Active or Not Active
      WARNING

      Display Default Contents Setting
      Key Low Battery Warning (Warn when key battery becomes weak) ON Function that warns the driver that the key battery power is low. ON or OFF
      1. ENTRY UNLOCK MODE SWITCHING FUNCTION
        1. To use the entry unlock mode switching function, make sure the engine switch is off and simultaneously press and hold the lock switch on the key and another key switch for 5 seconds.

          When the switches are pressed and held for 5 seconds, the entry door unlock mode changes in the following order: all door unlock mode, driver door unlock mode.

          NOTE:

          After pressing and holding the switches for 5 seconds, wait 5 seconds before performing the same procedure again.

          • All door unlock mode (default):

            When a touch sensor is touched, all the doors unlock.

          • Driver door unlock mode:

            When the driver door touch sensor is touched, only the driver door unlocks. When another touch sensor is touched, all doors unlock.

        2. The certification ECU receives this signal from the key and changes the smart key system to the appropriate entry unlock mode.
        3. The certification ECU sounds the wireless door lock buzzer and combination meter buzzer to inform the user that the mode has been switched.
          Mode Wireless Door Lock Buzzer Combination Meter Assembly (Buzzer)
          All Doors
          (Default)          		 Sounds 2 times Sounds once
          Driver Door
          (Customized)          		 Sounds 3 times Sounds once

          HINT: 

          The function only changes the entry unlock mode of the smart key system. It does not switch the unlocking of the wireless door lock control.

      2. KEY CANCEL

        The key cancel operation disables the following functions:

        • Entry Unlock/Lock
        • Key Lock-in Prevention
        • Entry Back Door Open
        • Warning
        • Entry Ignition
          1. The operation procedures are as follows:

            Precondition:

            Engine switch off, driver side door closed and unlocked.

            1. Unlock the driver side door once with the unlock switch of the key.
            2. Open the driver door within 5 seconds.
            3. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
            4. Close and open the driver door twice within 30 seconds.

              ((Driver door: Open condition → Close → Open → Close → Open)

            5. Unlock the driver side door twice with the unlock switch of the key within 5 seconds.
            6. Close and open the driver door once within 30 seconds.

              (Driver door: Open condition → Close → Open)

            7. Close the driver door within 5 seconds.

              When key cancel is activated, the wireless door lock buzzer sounds twice.

              To return to the original condition, perform the procedure again. When the original condition is restored, the wireless door lock buzzer sounds once.

    5. LIGHTING SYSTEM (for Interior)
      ILLUMINATED ENTRY

      Display Default Content Setting
      Lighting Time 15s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the ignition switch from off to ACC or ON. 7.5s/15s or 30s
      I/L when ACC OFF ON A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the room light turns on when the interior light switch is set to DOOR). ON or OFF
      I/L ON W/Door Key Unlock*2 ON A function that turns on the room light when the door is unlocked with the door key cylinder (the room light turns on when the map light switch is set to DOOR). ON or OFF
      Room Light when Aprchd*1 ON A function that turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR). ON or OFF
      Inside Foot Light*3 ON Changes the interior foot lights control. ON or OFF
      Center Console Spot Light ON Lights up the center console spot light when ignition switch is turned ACC or ON. ON or OFF
      Mirr-Foot-Lgt Approached*4 ON Door mirror foot light (when approaching vehicle) ON or OFF
      Mirr-Foot-Lgt Unlocked*4 ON Door mirror foot light (when unlocking doors) ON or OFF
      Mirror Foot Light Time*4 15s Door mirror foot light illumination duration 0s/7.5s/15s or 30s
      Light Control*5 ON Change the inside handle illumination control. ON or OFF
      Interior Light Control ON Change the engine switch illumination*1 or ignition key cylinder light*2 control. ON or OFF
      Exterior Light Control*4 ON Change the door mirror foot light control. ON or OFF
      • *1: w/ Smart Key System
      • *2: w/o Smart Key System
      • *3: w/ Interior Foot Light
      • *4: w/ Door Mirror Foot Light
      • *5: w/ Inside Handle Illumination
    6. METER / GAUGE SYSTEM
      WARNING

      Tester Display Default Content Setting
      Driver Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF
      Front Passenger Side Seatbelt Warning Buzzer*1 ON Function to turn on/off the seat belt warning buzzer ON or OFF
      • *1: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.
      DISPLAY

      Tester Display Default Content Setting
      Units By Region Ml/g Function to change the unit of the display km/l, Ml or g
      Language English Function to change language of display English/French
      ECO Driving Indicator ON Function to turn on or off the ECO driving indicator zone display in the multi-information display ON or OFF
    7. SEAT BELT WARNING SYSTEM
      SEAT BELT WARNING

      Display Default Contents Setting
      Driver Side Seatbelt Warning Buzzer ON If the driver side seat belt is unfastened and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON or OFF
      Front Passenger Side Seatbelt Warning Buzzer ON If the front passenger side seat belt is unfastened with the front passenger seat occupied and the vehicle is driven at approximately 20 km/h (12.5 mph) or more, the system sounds the seat belt warning buzzer. ON or OFF
    8. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)
      AIR CONDITIONER

      Display Default Contents Setting
      Set Temperature Shift Normal Function to set the temperature shift. +2 C/+1 C/Normal/-1 C or -2 C
      Compressor Mode Automatic Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. Automatic or Manual
      Air Inlet Mode Automatic Function to automatically change to recirculation mode when the A/C is turned on. Automatic or Manual
      Foot/DEF Auto Mode ON Function to turn on the airflow from the front and rear footwell register ducts and front defroster automatically when auto mode is on. ON or OFF
      Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the front defroster is on. ON or OFF
      Add Foot Air in FACE Mode ON When the FACE mode is selected, an additional amount of air is blown to the foot area. ON or OFF
    9. POWER WINDOW CONTROL SYSTEM
      POWER WINDOW

      Tester Display Default Content Setting
      Door Key P/W Up OFF This function is used to close the windows by operating the mechanical key. ON or OFF
      Door Key P/W Down OFF This function is used to open the windows by operating the mechanical key. ON or OFF
      P/W Up W/ Transmitter OFF This function is used to close the windows using the wireless key transmitter. ON or OFF
      P/W Down W/ Transmitter OFF This function is used to open the windows using the wireless key transmitter.. ON/OFF
      P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). Avail or Not Avl
      P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the master switch. Avail or Not Avl
      RR Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly RH. Avail or Not Avl
      RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the master switch. Avail or Not Avl
      RL Window Auto Up Avail This function is used to enable or disable the auto up function using the rear power window regulator switch assembly LH. Avail or Not Avl
      RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the master switch. Avail or Not Avl
      Door Key Linked Back P/W UP AVAIL This function is used to close the back door windows by operating the mechanical key. NOT AVL or AVAIL
      Door Key Linked Back P/W DOWN AVAIL This function is used to open the back door windows by operating the mechanical key. NOT AVL or AVAIL
      PSD & PBD OPERATION (W/ SMART KEY SYSTEM)

      Tester Display Default Content Setting
      Smart Back Door P/W Up SW AVAIL This function is used to permit or disable back door power window up operation via the luggage electrical key switch. NOT AVL or AVAIL
      Smart Back Door P/W Down AVAIL This function is used to permit or disable back door power window down operation via the luggage electrical key switch. NOT AVL or AVAIL
      Smart Back Door P/W Press ON 0.8 sec. This function is used to change the time that the luggage electrical key switch must be pressed to operate the back door power window. 0.8 sec./1 sec./1.2 sec. or 1.4 sec.
      Back Door P/W UP when half-shut NOT AVL This function is used to permit or disable back door power window up operation when the back door is ajar. NOT AVL or AVAIL
    10. SLIDING ROOF SYSTEM
      SLIDE ROOF

      Display Default Contents Setting
      Door Key Related Open*1 ON The function to manually open the sliding roof linked with the power windows by holding the driver side door key for 1.5 seconds or more to the unlock position when the ignition switch is off. ON or OFF
      Door Key Related Close*1 ON The function to manually close the sliding roof linked with the power windows by holding the driver side door key for 1.5 seconds or more to the lock position when the ignition switch is off. ON or OFF
      Wireless Key Related Open*2 ON The function to manually open the sliding roof linked with the power windows by pressing the transmitter UNLOCK switch for 1.5 seconds or more when the ignition switch is off. ON or OFF
      Door Key Related Operation Slide The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by holding the driver side door key for 1.5 seconds or more to the unlock position when the ignition switch is off. Slide or Tilt
      Wireless Key Related Operation Slide The function to select tilt up or slide open of the manual sliding roof operation linked with the power windows by pressing on the transmitter UNLOCK switch for 1.5 seconds or more when the ignition switch is off. Slide or Tilt

      HINT: 

      • 1: This function is linked with the power window key-linked function. If the power window key-linked function is set to OFF, the sliding roof key-linked function will not operate even when it is set to ON.
      • *2: This function is linked with the power window wireless transmitter-linked function. If the power window wireless transmitter-linked function is set to OFF, the sliding roof wireless transmitter-linked function will not operate even when it is set to ON.
    11. WIPER AND WASHER SYSTEM
      WIPER

      Display Default Content Setting
      Linked Rear Wiper Washer AVAIL Function to make the rear wiper run automatically after the washer function is used. NOT AVAIL or AVAIL
      Rewipe Function AVAIL Function to make the rear wiper run once automatically a certain amount of time after the washer function is completed, to prevent the dripping of washing fluid. NOT AVAIL or AVAIL
      Rear Wiper Interval Speed 3 sec. Function used to change the time from when the rear wiper stops moving until it starts moving again in intermittent mode. 3 sec./2 sec./4 sec. or 5 sec.
      Rear Wiper Retract Time 3 sec. Function used to change the time from when the rear wiper stops moving after the rear wiper switch is turned off until the rear wiper is stored in the spoiler. 3 sec./4 sec./5 sec. or 6 sec.
    12. LIGHTING SYSTEM (for Exterior)
      LIGHT CONTROL

      Display Default Content Setting
      Disp Ex OFF Sen NORMAL Changes brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clock light.*1 LIGHT2/LIGHT1/NORMAL/DARK1 or DARK2
      Disp Ex ON Sen NORMAL canceling lowering lights such as the combination meter indicator light, A/C indicator light, and clock light.*2 LIGHT2/LIGHT1/NORMAL/DARK1 or DARK2
      Light Auto OFF Delay 30s Function to continue illuminating the headlights for a certain period of time after closing all the doors with the ignition switch turned from ON to off under the condition that the headlight dimmer switch is at head or AUTO with the headlight on. OFF/30s/60s or 90s
      Sensitivity Normal A function to adjust the ambient light sensitivity of the automatic light control system.*3 Light2/Light1/Normal/Dark1 or Dark2
      DRL Function ON A function that enables or disables the DRL. ON or OFF

      HINT: 

      The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

      *1

      Brightness of lowering the lights
      GTY102714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
      *2

      Brightness when canceling the lowering of the lights
      GTY102714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
      *3

      Lighting brightness
      GTY102714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Setting Dark2 Dark1 Normal Light1 Light2
scientia non olet · About LEMON Manuals