LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> 4Runner Trail >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Smart Key System (Keyless Start) (Diagnostic Codes & Symptom Tests) >> Smart Key System (For Start Function) >> Symptom Test >> Engine does not Start >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

NOTE:
  • When using the Techstream with the engine switch off to troubleshoot: Connect the Techstream to the vehicle and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.
  • Before performing the inspection, check that there are no problems related to the CAN communication system and LIN communication system.
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.

HINT: 

After the certification ECU, steering lock actuator assembly (steering lock ECU) and/or ID code box is replaced, perform the registration procedure for the engine immobiliser system. Refer to REGISTRATION .

scientia non olet · About LEMON Manuals