Crankshaft Position Sensor: Removal: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
REMOVE V-RIBBED BELT . Refer to REMOVAL - Step 4
REMOVE GENERATOR ASSEMBLY . Refer to REMOVAL - Step 4
DISCONNECT COOLER COMPRESSOR ASSEMBLY . Refer to REMOVAL - Step 63
REMOVE CRANKSHAFT POSITION SENSOR
1. Disconnect the crankshaft position sensor connector.
  
  Fig 1: Identifying Crankshaft Position Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and crankshaft position sensor.