Typical Enabling Conditions
| Monitor runs whenever following DTCs not present |
None |
MANUAL TRANSMISSION: CASE 1
| Engine coolant temperature |
70°C (158°F) or more |
| Engine speed |
2000 to 5000 rpm |
| Fuel cut at high engine speed |
Not executing |
| Engine load |
33.6% or more |
| ECT sensor circuit fail (P0115, P0117, P0118) |
Not detected |
| MAF meter circuit fail (P0101, P0102, P0103) |
Not detected |
MANUAL TRANSMISSION: CASE 2
AUTOMATIC TRANSMISSION
| Time after ignition switch OFF to ON |
3 seconds or more |
| Vehicle speed |
9 km/h (5.59 mph) or more |
| Transfer neutral switch |
Not N position |