DTC P2610: ECM / PCM Internal Engine Off Timer Performance: Procedure

1. Replace the ECM. Refer toREMOVAL .

NEXT: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Clear the DTCs. Refer toDTC CHECK / CLEAR .
4. Refer to CONFIRMATION DRIVING PATTERN the confirmation driving pattern.
5. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes / Pending.
6. If no pending DTC is displayed, the repair has been successfully completed.

NEXT → END