LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Land Cruiser >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Control System (Service Information) >> Heated Oxygen Sensor >> Inspection >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Oxygen Sensor: Inspection: Inspection

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Measure the heater resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (HT1B) - 2 (+B)
      (for Bank 1)      		 20°C (68°F) 11 to 16 Ω
      1 (HT2B) - 2 (+B)
      (for Bank 2)

      If the result is not as specified, replace the sensor.

      Fig 1: Identifying Heated Oxygen Sensor Connector
      GTY148720Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals