Speed Sensor: Installation: Installation

INSTALL SPEED SENSOR SP2

Fig 1: Locating Speed Sensor SP2 Connector And Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Coat a new O-ring with ATF and install it to the sensor.
2. Install the sensor with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the sensor connector.
INSTALL SPEED SENSOR NT

Fig 2: Identifying Speed Sensor NT Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Coat a new O-ring with ATF and install it to the sensor.
2. Install the sensor with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the sensor connector.