LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Matrix Base, Automatic >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Meter / Gauge (Diagnostics - Introduction) >> Meter/Gauge System >> DTC Check/Clear >> DTC Check/Clear
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON and turn the Techstream on.
    3. Enter the following menus: Body Electrical/Trouble Codes.
    4. Check for DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON and turn the Techstream on.
    3. Enter the following menus: Body Electrical/Combination Meter/Trouble Codes.
    4. Clear the DTCs.
scientia non olet · About LEMON Manuals