Ignition Coil And Spark Plug: Removal: Removal

REMOVE NO. 2 CYLINDER HEAD COVER . Refer to REMOVAL - Step 10
REMOVE IGNITION COIL ASSEMBLY
1. Disconnect the 4 ignition coil connectors.
  
  Fig 1: Locating Ignition Coil Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 4 bolts and 4 ignition coils.
  
  Fig 2: Identifying Ignition Coil Components And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE:
  When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.
REMOVE SPARK PLUG
1. Using a 14 mm spark plug wrench, remove the 4 spark plugs.
  
  Fig 3: View Of Spark Plugs And Wrench
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002