Headlight Assembly: Installation: Installation
WARNING: This page is about a different car, the 2011 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL HEADLIGHT ASSEMBLY
- Connect each connector.
- Install the headlight assembly with the 2 bolts and screw.
Torque: 3.6 N*m (37 kgf*cm, 32 in.*lbf)
- INSTALL FRONT BUMPER ASSEMBLY
Refer to INSTALLATION
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .
- ADJUST HEADLIGHT AIMING
Refer to ADJUSTMENT
- ADJUST FOG LIGHT AIMING
Refer to ADJUSTMENT