April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

INSTALL CAMSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to the O-ring of the sensor.
  
  Fig 1: Identifying Camshaft Position Sensor O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft position sensor with the bolt.
  
  Fig 2: Locating Camshaft Position Sensor Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
3. Connect the camshaft position sensor connector.
INSTALL AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE See step 2
INSPECT FOR ENGINE OIL LEAK
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 93