LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2010 >> Prius Base >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Starter >> Smart Key System (Start Function) (Diagnostic Codes & Circuit Tests) (Except PHV) >> SMART KEY SYSTEM (for Start Function) >> Circuit Test >> Power Source Mode does not Change to ON (READY) >> Inspection Procedure >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure: Notes

NOTE:
  • When the power management control ECU is replaced with a new one and the cable from the negative (-) auxiliary battery terminal is connected, the power source mode becomes on (IG) mode. When the auxiliary battery is removed and reinstalled, power source mode that was selected when the auxiliary battery was removed is restored.
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
scientia non olet · About LEMON Manuals