DTC Check / Clear

WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

DTC CHECK
HINT:
- When DTC B1650/23 is detected as a result of troubleshooting for the airbag system, troubleshoot the occupant classification system.
- Use a Techstream to read and clear DTCs, otherwise the DTCs cannot be read and cleared.
1. Check for DTCs.
  1. Connect the Techstream to the DLC3.
  2. Turn the ignition switch to the on position.
  3. Check for DTCs by following the prompts on the tester screen.
    HINT:
    
    Refer to the Techstream operator's manual for further details.
2. Clear the DTCs.
  1. Connect the Techstream to the DLC3.
  2. Turn the ignition switch to the on position.
  3. Clear the DTCs by following the prompts on the tester screen.
    HINT:
    
    Refer to the Techstream operator's manual for further details.