DTC B1787: Rear Occupant Classification Sensor LH Collision Detection: Description
WARNING: This page is about a different car, the 2010 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
DTC B1787 is output when the occupant classification ECU receives a collision detection signal sent by the rear occupant classification sensor LH when an accident occurs.
DTC B1787 is also output when the front seat assembly RH is subjected to a strong impact, even if an actual accident does not occur.
However, when the occupant classification ECU outputs a collision detection signal, even if the vehicle is not in a collision, DTC B1787 can be cleared by performing the zero point calibration and sensitivity check.
Therefore, when DTC B1787 is output, first perform the zero point calibration and sensitivity check.
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| B1787 |
|
|